Usually question and solution about corn sheller

1. Corn feeding device return

   Cause: Excessive feeding moment
   Elimination methods: Evenly continuous feed

2.Roller jam

   Cause: at the end of drum have a small adjustment.

   Elimination methods: Roller adjustment plate transfer bigger or simultaneously separating outlet transfer large

3.The rate of threshing corn

  Cause: Grain moisture content is too large, the roller adjustment board  is too large, the drum rotation number is low, spiked badly worn, uneven amount of feed.

  Elimination methods: Drying corn, adjust the roller adjustment board, raise the drum speed, replace the spikes and uniform continuous feed

4.Entrained more

   Cause: Drum major exporter, the drum rotation speed is high, the separation chamber exporter.

   Elimination methods:Adjustment terminal regulatory board and the separation roller adjustment board, making their exports become smaller; the other can reduce the speed.